Solar Panel Degradation: How Much Output Do You Lose Each Year?

Solar Panel Degradation: How Much Output Do You Lose Each Year?

You've installed a rooftop solar system, and it's doing its job. But over 25 years, will it produce the same amount of power as on day one?

It won't, and that's normal. Every solar panel loses a little efficiency each year. This is called solar panel degradation. The good news is that the loss is small, predictable and covered by warranty. Here is what it means for your system.

What Is Solar Panel Degradation?

Degradation is the slow, natural decline in a panel's power output over time. A panel that produced 100% of its rated power in its first year will produce slightly less in each year after that.

It is not a defect. Sunlight, heat, moisture and the ageing of materials all wear on a panel's cells and components. Even the best panels in the world degrade.

How Much Output Do You Lose Each Year?

For quality modern panels, the typical annual loss is around 0.4% to 0.7% per year. Many manufacturers quote about 0.5% for premium panels.

A simple example for a 5 kW system:

Year Approx. output vs. original
Year 1 ~98–100%
Year 10 ~93–95%
Year 25 ~85–88%

After 25 years, a good system still produces most of its original output. Exact figures depend on the panel model, so always check the datasheet and warranty for your specific panels.

Is the First Year Different?

Yes. Some panels show a slightly larger drop in the first few months, known as light-induced degradation (LID). It is usually around 1–2% and then settles into the steady yearly rate. Newer cell technologies are designed to reduce this early loss.

What Affects the Degradation Rate?

Not all panels age at the same pace. These factors matter most:

  1. Panel quality and technology. Premium manufacturers use better materials and stricter testing. Choosing a reputable brand, such as the SMA, REC and Panasonic range we work with, is the first step to slower degradation.
  2. Heat. Constant high temperatures speed up wear. Kerala's warm climate makes good panel selection and proper mounting (with airflow beneath the panels) especially important.
  3. Humidity and salt. Moisture can attack seals, junction boxes and connectors. Coastal homes in places like Kochi face added salt exposure, so corrosion-resistant mounting and quality components matter.
  4. Installation quality. Poor wiring, weak mounting or bad earthing can cause damage that looks like degradation but is avoidable. Working with an experienced EPC contractor that handles engineering, design and construction reduces this risk.
  5. Shading and dirt. These don't permanently damage panels, but they lower output and can create hot spots if ignored.

Degradation vs. Temporary Output Loss

Many owners confuse the two. If your generation drops suddenly, it's rarely degradation, which happens gradually over years. More likely causes include:

  • Dust, leaves or bird droppings on the panels
  • New shade from a tree or nearby building
  • An inverter fault or a loose connection
  • Seasonal change, such as monsoon cloud cover

A system that has lost 10% overnight has a problem to fix, not a degradation issue.

Does Degradation Affect Different System Types?

The panels degrade at the same rate whichever way your system is configured, but the effect on your savings and backup differs:

  • On-grid systems: Slightly lower generation means slightly fewer units exported or offset against your bill.
  • Off-grid systems: Sizing the system with a small margin helps ensure it still meets your needs in later years.
  • Hybrid systems: Both panels and batteries age, so plan for each separately.

The inverter also matters. Micro inverters optimise each panel individually, so one underperforming panel doesn't drag down the whole array.

How to Slow Down Degradation

You can't stop it, but you can keep it at the low end of the range:

  • Choose tested, certified panels from reputable manufacturers.
  • Insist on professional installation with proper mounting, wiring and earthing.
  • Clean panels regularly, especially after dusty spells or heavy bird activity.
  • Monitor generation. A sudden fall is your early warning of a fault.
  • Take an annual maintenance contract (AMC). Routine inspections catch loose connections, corrosion and inverter issues before they cost you output.
Understand Your Warranty

Panels usually carry two warranties:

  • Product warranty: covers manufacturing defects, often 10–25 years depending on the brand.
  • Performance warranty: guarantees a minimum output at set points, commonly around 80–90% of original power at 25 years.

Read the performance warranty before you buy. It tells you the maximum degradation the manufacturer will stand behind.

Does Degradation Change the Payback?

Only slightly. Because the yearly loss is so small, most systems still deliver strong savings across their lifetime. Your savings depend more on system size, your tariff and the available subsidy than on degradation. Panels that lose 0.5% a year will usually pay for themselves well within their lifespan and keep producing long afterwards.

Solar degradation is real but modest. With good panels, careful installation and regular maintenance, your system should deliver strong output for 25 years and beyond. The best protection is to choose quality at the start and keep the system looked after.

Thinking about going solar, or worried about an existing system's performance? Request a free quote or contact our team. Upload your electricity bill, and we'll recommend the right system and maintenance plan for your home or business.